In this way the PS4 should connect to the Wi-Fi network without any problem. Once all the fields have been filled in, you have to go ahead, set up an automatic MTU and choose not to use proxy servers. This value can also be found easily by giving the command “ipconfig / all” in the Windows Command Prompt.
Default gateway: the IP address of the router (eg 192.168.1.1).Subnet mask: the value of the Subnet Mask, which is usually 255.255.255.0 but can easily be found by issuing the command “ipconfig / all” in the Windows Command Prompt.IP address: the IP address to be assigned to the console (eg 192.168.1.27), which obviously must be consistent with the addresses of the other devices in the network of your router.In case of problems or special needs (eg the need to assign a static IP to the console), instead of selecting the Typical item, select the Custom and Manual items from the menu for the Wi-Fi connection and enter the following parameters manually. The PS4, within a few seconds, will verify the correctness of the network settings and will connect to the selected network. In the case of connection via Wi-Fi network, you need to select the Typical item, choose the Wi-Fi network to which you want to connect the console and type the corresponding access key. In the menu that opens, go to Configure Internet Connection and choose whether to connect the PS4 to the Internet via a Wi-Fi network or LAN cable (and then Ethernet cable) by selecting one of the two options available on the screen.
0 kommentar(er)
